LED Baton Road Flare: Rechargeable LED Batons:
Crush proof, rechargeable 15 LED baton with 5 flashing patterns and visibility from up to 1 kilometre. Corrosion proof, waterproof (submersible to 20 meters) and has a very strong built in magnetic mount.
Can be purchased individually (ELF-3) or in a 3 pack kit (chargers and magnetic mount included).
Product Details
LED Safety Batons are a safe, eco-friendly, highly visible, rugged, waterproof and cost effective alternative to conventional incendiary road safety flares. The rechargeable 15-LED baton is made of crushproof polycarbonate plastic with an impact resistant rubber housing. It features 5 different flash patterns that are visible up to 1x kilometer. The housing is waterproof to a depth of 20 meters and will float. It can be held in your hand, placed on the ground or attached to any magnetic metal surface with the built in magnet.
Use LED Baton Road Flares/Safety Wands to identify road hazards, signal for help, mark detours or direct traffic. LED Batons are approved for use in personal vehicles and in the aviation, trucking, marine and public safety industries. By using rechargeable LED batons, you will reduce the risk of fires, ground water contamination and batteries in our landfills.
What is an LED Safety Baton?
It is a flameless, non-toxic, battery-powered multipurpose signaling device in a plastic crushproof enclosure that can be used as an emergency road flare or a handheld safety wand. It is illuminated by multiple ultra-bright LED lights instead of an incendiary smokey flame.
Non-Toxic LED Batons Are Eco-Friendly
Traditional incendiary flares are neither safe nor eco-friendly. Not only do they produce a hazardous, visible smoke, they also contain a highly toxic chemical contaminant called perchlorate. A study conducted by a Department of Health found that, “240,000 litres of water could be contaminated by discarding a single flare in the water source”. LED batons will not contaminate ground water and do not produce smoke or ash.
Key Features: LED Batons Are Better Than Traditional Incendiary Flares
• Highly Visible - 15 super bright LEDs that can be seen from 1 kilometre.
• Cost Effective - You'll save money when you use LED Flares instead of incendiary flares
• Extremely durable - high impact plastic that is crush proof and corrosion proof
• Reusable - Powered by rechargeable lithium ion batteries
• Eco-Friendly - will not contaminate ground water and does not produce smoke or ash.
• Safe - will not ignite fuel or cause a fire if tipped over
• Flameless - will not cause burns when handled or scorch pavement
• Waterproof for use in inclement weather
• Submersible to 20 meters so it may be used for marine applications. Will float unless secured.
• 5 flashing patterns including SOS Rescue (Morse code)
• Powerful built in magnet - attach to any magnetic metal surface. Place on a vehicle, fence, or ferrous metal surface.
• Can be used in any vehicle
• Batons will keep a full charge for 90 days.
Applications
LED Safety Batons Have Many Uses. Lay one on the ground as a road flare, hold it in your hand as a safety wand, use underwater or attach it to any magnetic metal surface. Use them in cars, trucks, boats, RVs, semi-trucks, construction zones and emergency response vehicles.
• Identifying road hazards or closures
• Use as a hand-held signaling device to direct traffic (vehicle, crowds, aviation, marine)
• Vehicle breakdowns
• Traffic control on fire and emergency scenes
• Cordoning off police scenes and DUI checkpoints
• Evacuation routes
• Fuel spill warning
• Signal for help
• Power failures or blackouts
• Marine applications - boater emergency safety or scuba
• Use at construction sites
• Event management
• Aviation marshalling and taxiing and helicopter landing zones
Specifications
Waterproof Yes
Crush Proof Yes. Can withstand the impact of roadside
traffic. Can even be run over by a truck and still operate.
Battery Built in Rechargeable Lithium Ion 580 mAH ~ 3.6V
Battery Shelf Life 5 years. Will keep a full charge for 90 days.
Charging Specifications - Individual Units
120V AC/DC Charger: (UL Listed) Input: 100-240V AC, 50-60 Hz 0.15A
Output: 5.0 V DC 1200 mAh
Charging Specifications - Individual Units
12V DC Charger: (CE) Input: 12-24V DC; Output: 5.0V 850 mAh
Charging Specifications - 3 Pack Kits
120V AC/DC Charger: (UL Listed) Input: 100-240V AC, 50-60Hz
Output: 5V, 1200mA
Charging Specifications - 6 Pack Kits
12V DC Charger: (CE) Input: 12-24V DC; Output: 5V, 850mA
Charging Times: 1 baton = 4-6 hours; 3 baton kit = 8-10 hours
Number of LED Bulbs 15
Visibility Up to 1/2 mile
Number of Flash Patterns 5
Magnetic Mount Yes - Built In N35 magnet
Usable With Traffic Cone Yes
Submersible For Diving Yes to 50 Feet
Buoyant Yes
Temperature Range -32ºF TO 240ºF (-36ºC - 116ºC)
LED Baton Weight 8 oz
LED Baton Dimensions 10.75” L x 1.75” W x 1.375” H
3 Pack Recharging Case Weight 4.5 lbs
63Pack Recharging Case Dimensions 13.23” L x 13.62” W x 2.52” H
Limited Warranty 1 Year
DOT & Traffic Safety Compliance: 1. U.S. DOT (FMCSA) 49 CFR § 392.25 & 393.95 (g)
(prohibits the carrying of any flame-producing flare
on any Commercial Motor Vehicle (CMV) transporting
explosives; any cargo of flammable liquid or flammable
compressed gas, whether loaded or empty; or any CMV
using compressed gas as a motor fuel).
2. MUTCD Type A (flashing) and Type C (solid on)
3. NFPA 1901 Standards for Traffic
Flashing Patterns
Battery life is dependent upon which flashing pattern is used. The stand-by charging feature allows batons to be
kept plugged in when not in use without damage to the battery or unit. Batons will keep a full charge for 90 days. When fully charged you may expect these run times.
Flash Pattern Run Time
#1 - Rotate 5 hours
#2 - Quad Flash 10 hours
#3 - Alternating Blink 3 hours
#4 - SOS Rescue (Morse Code) 10 hours
#5 - Steady on - high 4 hours
What's Included: Single Pack Includes:
• 1 LED Baton
• 120 Volt Wall Charger
• 12 Volt Car Charger
• USB Charger
• Storage Bag
3 Pack Kit Includes:
• 3 LED Batons
• Hard Plastic Case for Recharging and Storage
• 2 Flex Fit Tripods to hold baton in a vertical position, even on uneven ground *
• 120 Volt Wall Charger
• 12 Volt Car Charger
Color Options: Orange Shell/Red LED (Many jurisdictions require the light for road flares to be red)
* The 3 Pack kit includes two Flex Fit Tripods which hold the baton in a vertical position, even on uneven ground. Can also be used as a post and inserted into the top of safety cones for additional safety lighting.
LED Baton Road Flare (Type-3) are emergency safety flares that replace standard safety wands and incendiary flares. Use of these safety flares reduces the risk of fires, ground water contamination, and batteries in our landfills.
The kit includes 3-single flares and 2-Flex Fit Tripods, inside a durable storage case that doubles as a charging unit with all chargers included. [View additional images]
• 15 LEDs visible up to 3 kilometres
• Waterproof to 20 meters
• Robust & Crush proof
• Corrosion proof, Floats and is completely waterproof
• High strength magnets attach to metal surfaces
• Rechargeable battery included, does not need to be replaced
• 5 Flash patterns including S.O.S. internationally accepted Morse Code.
Includes 220 Volt wall charger, 12V car charger, USB charger Uses: Emergency safety flare that can be held in your hand or placed on the ground to identify road hazards, signal for help, mark detours, or direct traffic. Approved for use in personal vehicles and in the aviation, trucking, marine, and public safety markets.
ITEM: ELF LED-Flare Type-3: Weight: 400 grams each
• 5x LEDs visible up to three kilometres
• Waterproof to 20 meters underwater
• Robust and Crush proof
• Corrosion proof (floats in sea water & only needs a quick rinse in fresh water);
• High strength magnets attach to ferrous metal surfaces
• Rechargeable battery is included, does not need to be replaced
• Five selectable Flash patterns including the S.O.S. International S-O-S Morse Code
• Includes 220 Volt Australian AC/DC wall charger, 12 Volt car charger, USB PC charger
Emergency safety flare that can be held in your hand or placed on the ground to identify road hazards, signal for help, mark detours, or direct traffic. Approved for use in personal vehicles and in the aviation, trucking, marine, and public safety markets.
Ideal for identifying relay exchange points, turnaround points, aid stations.
