Safety Xpress - Products

Heavy Duty 5mm gauge Steel Speed Humps come in 1 metre modules and installed along side each other to form the speed hump length you need. eg. if you need 3 m you need 3 modules (each module measures 1 metre long). Add End Caps to finish off your speed hump and eliminate any trip hazards. End Caps sold separately. Metal End Caps can be purchased here. Please note our Ultimate Speed Hump Ends is also compatible with SHSTEEL1M5 (FREE) Fixing Kit - 6 x M10 Coach Screws 100mm, washers and nylon plugs. Other types of fixings can be purchased at extra cost. Complies to Australian Standards AS2890.1:2004.

The Ultimate Tactile is Aussie made to comply with industry standards set out in AS/NZS 1428.4.1:2009 and is designed with a high P5 slip rating suitable for almost any application. This tactile has been cleverly designed using an ultra UV stabilised resin guaranteed to last a minimum of 5 years without fading and a specially developed recycled plastic material resulting in a super strong product that will be durable in even the most heaviest pedestrian traffic areas. We recommend applying a Surface Primer when installing tactiles to timber, trowelled concrete and other porous surfaces. Price displayed is for 1 x Tactile. 6 x Tactiles supplied per box for qty purchase. UV Stabilised - Guaranteed for 5 Years Australian Made P5 Slip Rating Vic Roads and QLD Main Roads Approved

The “Ultimate” Australian Made Speed Hump Each Mid Section Sold Individually. End Caps Sold separately They work great slowing traffic down in shopping centres, multi and ground level carparks, in fact any private road or car park where they are installed. Manufactured from hard wearing U.V. stabilised composite plastic, they won’t crack, wear or fade. Exclusive, unique ‘honeycomb’ base for extra strength. The weight load capacity is a huge 100 tonne at a speed of 30km/hr or less. Recessed fixing points so you can rest assured the fixings won't cause any tyre damage. Each Mid Section comes with built-in reflectors and 2 FREE fixings per section (different types of fixings can also be purchased). Cable channel measuring W22mm x H20mm under each mid section. Easy installation. Alternatively we can provide additional installation service. The “Ultimate” Speed Hump is Australian Made. Complies with Australian Standard 2890.1: 2004. Each Mid Section measure 250mm long so it’s easy to work out the total length of speed hump you need. eg. 1 Metre = 4 pcs of Mid Sections and so forth to work out the total number of mid sections you need and add to cart. We supply your order in alternating yellow and black sections, so there is no need to specify the colours. Select End Caps here to finish the job.

The 140mm Surface Mount Bollard is one to consider for your asset protection needs. Assess the risks and threats, determine the areas requiring protection and order these to fit. Designed to car park regulations the Safety Xpress Car Park Bollard stands 1300mm. This bollard restricts vehicle access whilst allowing clear pedestrian flow. Ideal for maintaining health and safety requirements in areas such as loading docks and bus depots where heavy vehicles are present. This bollard comes with class 1 red reflective band finishes the look. Easy to install yourself, no professionals required. Step by step assistance is provided in our downloadable installation guide.

Our Australian Made LLDPE Wheel Stops are built to last. They are UV stabilised and therefore will not fade. Unlike concrete wheel stops our Ultimate Wheel Stop will not crack over time. One of the most durable wheel stops on the market to suit all applications. Available in Black, Safety Yellow, Disabled Blue and Grey. Specifications: SKU: ULTWS Warranty: 5 Year Structural Warranty Material: LLDPE (made from 100% recyclable material) Colour: Yellow, Blue, or Grey Compliance: AS/NZS 2890.1:2004. Weight: 5.15kg Height: 100mm Length: 1650mm Width: 150mm Fixings & Accessories: 3 x Fixings Required Per Wheel Stop (sold separately) 3 x Cover Plugs required per Wheel Stop (supplied)