East India Chemicals - Products

Item Code: RXSOL-33-3323-025 ORG MC 511 (Membrane Cleaner) is a high pH liquid formulation designed to remove organics, silt, and other particulate deposits from polysulfone, fluorocarbon, and all polyamide thin film composite reverse osmosis (RO) and ultrafiltration (UF) membranes. The product is effectively used in nanofiltration (NF), and microfiltration (MF) application. This product provides superior cleanings allowing longer run times. 1) ORG MC 882 (Membrane Cleaner ) : Concentrated alkaline cleaner effective on a wide range of organic foulants Buffered pH to maintain optimum cleaning performance throughout cleaning cycle Liquid cleaner easily diluted to application strength Optimal results when used in a program that includes an acid-based ORG MC 882 product. Part No.: RXSOL-33-3324-025. 2) RXSOL ORG - 6 Sludge Cleaner : Part No.:RXSOL-20-2059-025. 3) ORG old : Part No.: RXSOL-20-2090-020. 4) RXSOL RO - 4 Organic Cleaner : RXSOL RO-4 is a organic Cleaner for heavy duty organic deposition in RO Membranes. Membrane Cleaner - removal of Organic matter like oil and film. RXSO-4 is a low pH liquid formulation designed specifically to remove organic foulants (including biological) and scale from reverse osmosis (RO), nanofiltration (NF), ultrafiltration (UF), and microfiltration (MF) membranes. This product contains a blend of solubilizing and complexing agents, as well as a surfactant to enhance cleaning efficacy. Used in tandem with an alkaline cleaner, this highly effective product provides superior cleanings, resulting in longer system running times and optimal membrane life expectancy. Part No.: RXSOL-33-3308-025. 5) RXSOL ORG - 3 Powerfull Cleaner : RXSOL-19-1421-025 is a unique formulation blended from inorganic, organic Compound and solvent with powerful dispersing agent .Readily soluble in water in all proportions.RXSOL-10-1005-210 is non- corrosive to metal like copper, aluminium, Mild steel, and plastic.It is non toxic which makes handling easy. Functions Complete removal of dirt, oil, carbonized grease, heavy oil, gum , vegetable oil , Lube oil, soot , asphalt , carbon stains etc. Gives clear finish to the surface. Part No.: RXSOL-19-1421-025. 6) ORG Boll clean 2000 : Very usefull to clean fuels recipitation of paraffin and asphalt or with lubricating oils mixing of different types of oil can form solid encrustations on the mesh. It is heavy duty emulsifying liquid , which is Extremely and effectively removes tenacious carbon deposits, burnt grease, Oily residues and lacquers , from fuel oil and lube oil purifiers, filters, separators. Effective cleaning of fine meshes is achieved by soaking in RXSOL-16-1665-025 followed by blasting with compressed air using a cleaning gun. Part No. : RXSOL-16-1665-025. 7) RXSOL ORG 7914 ( BIOCIDE ALGAECIDE) : Part No. : RXSOL-40-4048-025. 8) RXSOL ORG - 11 (Cream Scouring Cleanser with Abrasive) : part No. : RXSOL-15-1656-001.

Item Code: RXSOL-33-3321-030 Scaling and iron fouling of the RO membranes will reduce system performance and lead to premature membrane replacement. Precipitation of scale and deposits build up on the RO membrane, which leads to poor permeate quality, low permeate production, unscheduled downtime, increased water consumption and increased energy costs. For RO units with a feedwater flowrate of 545m3/day (100 GPM) or less, the recommended product would be ORG - 191 t (Membrane Antiscalant). Other Valuable Product ::: 1) Antiscalant Polymer ::: Part No.- RXSOL-33-3302-020 Antiscalant water additives, used as pretreatment for Reverse Osmosis systems, are highly effective in preventing membrane scaling. This is a reverse osmosis membrane treatment chemicals . It is highly concentrated polymer chemicals. •Excellent control of carbonate and sulphate scales for cost effective operation. • Compatible with all major membranes • International potable water approvals. • Dispersant •Iron tolerant •Not affected by chlorine or other oxidizing biocides under normal conditions of use 2) ANTISCALANT 9209 RX : Antiscalant 9209 Rx is specially designed to control the development of scale in seawater distillation plants. It is based on a synergistic blend of phosphonates which are found to be more effective than other polymers at controlling carbonate and sulphate scale formation in sea water distillation units . Part No.: RXSOL-51-6005-025. 3) RXSOL Antiscalant C.I : RXSOL Antiscalant CI is very power full superior product which making the film to protect the Corrosion and antiscalant in Pipe line and equipment where supplies hot and cold water. Rxsol Antiscalant CI is a special formulated Product by liquid silicate and inorganic polyphosphates can Food that is used in the treatment of fresh hot and cold water, for protect the corrosion and scale deposit in Pipe line and Equipment. This significantly reduces the corrosion which caused by aggressive water and promotes the formation of a protective film. Prevents the precipitation of calcium and magnesium in water. Part No.: RXSOL-33-2034-025. 4) Antiscalant Ro : Part No. RXSOL-33-3302-025. This is a reverse osmosis membrane treatment chemicals . It is highly concentrated polymer chemicals. Antiscalant RXSOL-33-3302 is a liquid antiscalant designed to inhibit scale in cellulose acetate and polyamide membrane separation systems. The formulation contains a 35% by weight solution of poly acid that has a tight molecular weight range of 2000. This product is designed for use in waters that do not have a high potential for colloidal and silt fouling of RO membrane surfaces (i.e. groundwater applications). Antiscalant RXSOL-33-3302-025 can be injected neat or diluted and a sitespecific dosage can be determined using software program. 5)ORG - 191 t (Membrane Antiscalant) combines the product reliability of ORG - 191 t (Membrane Antiscalant) for advanced monitoring and control. ORG - 191 t (Membrane Antiscalant) is a highly effective scale inhibitor whose active components were developed to treat reverse osmosis (RO) systems. ORG - 191 t (Membrane Antiscalant) has shown for over 20 years excellent performance against the following scalants: calcium carbonate, calcium sulfate, barium sulfate, strontium sulfate, calcium fluoride, silica and iron..Part No:RXSOL-33-3321-030. 6) Antiscalant ORG EV 2030 :Part No.: RXSOL-33-3325-230.

Item Code: RXSOL-22-3019-210 RXSOL ORG 10 is a high pH formultion that has been designed specifically to remove organics, silt and other particulate deposits from all polyamide, polysulfone and thin film composite membrane surfaces. RXSOL ORG 10 is a powdered buffered alkaline detergent developed , Especially for cleaning alkaline tolerant reverse osmosis and ultrafiltration membranes. APPLICATION ::: Maintains production capacity Special formula maintains membrane flux rate Chelates and buffered alkalinity effectively remove fouling agents from alkaline Tolerant RO and UF membranes BENEFIT ::: Dissolves freely to reduce labor and cleaning time, Easy to add balance formulation eliminates need for adding separate additives or boosters, Rinse quickly and completely to reduce cleaning time ITS ADVANCE FORMULATION MakesEconomical use cost and recommended use dilution, Chlorine free formulation helps assure compatibility with membrane to Extent membrane life. Other Valuable Product ::: REVERSE OSMOSIS MEMBRANE CLEANER 1) Membrane Cleaner RXSOL- 3304 ::: RO membrane cleaners is specifically designed to remove iron fouling for silica. It also has effectiveness against calcium carbonate scaling. RXSOL-33-3304-025 performance can be enhanced by adding low / high ph cleaners to the cleaning solution although some minor ph correction may be necessary. It should always be used as recommended by the membrane manufacturer or equipment supplier, in respect to cleaning ph and temperature. it also contains organic dispersants that helps to break down colloidal clay deposits and imparts better efficacy to biocides by penetrating into films. it is specifically developed for removing iron, silica, metal silicates, metal oxides/hydroxides and other colloidal/particulate based foulants from ro membranes. It is also effective to remove calcium carbonate, calcium phosphate and silt. As RXSOL-33-3304-025 is buffered, the cleaning solution will stabilise at pH 3.6. High level of active substance. 2) RXSOL RO -1 Heavy Soil Cleaner ::: This is a concentrated liquid detergent additive developed specifically for extraordinary soils caused by periodic fluctuations in membrane processes including RO, NF, UF and MF. RXSOL R/O-1 , Inorganic Cleaner : It is heavy duty cleaner for organing Salt deposit as CaCO3, CaSO4, and BaSO4 for RO Membranes. 3) RXSOL RO - 3 ::: RXSOL RO-3 is a Metal Oxide Cleaner for Foulant which is caused by heavily deposit metal oxide CaCO3, CaSO4, BaSO4,for RO Membranes. This Membarance cleaner is also very effective fo removal of Acid insoluble Deposits like calcium sulfate Phosphate . 4) RXSOL RO - 4 Organic Cleaner ::: RXSOL RO-4 is a organic Cleaner for heavy duty organic deposition in RO Membranes. Membrane Cleaner - removal of Organic matter like oil and film. RXSO-4 is a low pH liquid formulation designed specifically to remove organic foulants (including biological) and scale from reverse osmosis (RO), nanofiltration (NF), ultrafiltration (UF), and microfiltration (MF) membranes. This product contains a blend of solubilizing and complexing agents, as well as a surfactant to enhance cleaning efficacy. Used in tandem with an alkaline cleaner, this highly effective product provides superior cleanings, resulting in longer system running times and optimal membrane life expectancy. This liquid membrane detergent specifically designed for cleaning reverse osmosis, nanofiltration, ultrafiltration and microfiltration membranes. 5) RXSOL RO - 2 Bio Film Cleaner ::: RXSOL RO-2 is a silica and biofilm cleaner to remove the fouling which resulted from the accumulation of foulant such as Silica and biofilm on the semi - Prermable Membrane surface.

Item Code: RXSOL-13-1647-005 Multi Surface Creme Grafitti Cleanser ::: Part No- RXSOL-13-1010-025 RXSOL-13-1010-025 is An effective mixture of cleansing paste. Excellent for use on any hard surface. Simply apply to surface, allow to stand, and finally wash with RXSOL-10-1006. IT has been developed for one job to remove graffiti. Just apply onto the affected area allow a few seconds to work and then wash away or wipe off. Housekeeping and industrial cleaning chemical, Save lot of time and cleaning makes easier. Result can do in fifteen minutes what it would take an hour or more for with a standard bleach cleanser Mild acid, mild abrasive formula quickly removes stubborn stains without scratching the surface Provides controlled sudsing so it rinses freely for a clean surface Its viscous thickened creme formula makes it easy to apply on vertical surface. Apply to surface, allow to stand for several minutes, agitate and wash with RXSOL-10-1006 .( Degreaser Liquid Alkaline ) Apply concentrated. Field : For the removal of unsightly grafitti, obscenities or other marking from marble, bricks, terrazzo, metals etc Floor Cleaner ORG NEUTRASEL ( Neutralizer & Salt Remover for Carpet & Floors ) ::: Part No.- RXSOL-13-1647-005 Neutralizer & Salt Remover for Carpet & Floor is a biodegradable concentrated detergent that effectively neutralizes alkaline residues and removes salt and calcium deposit on floors and carpets. Its powerful deep penetrating formula, can also be use as a super efficient cleaner that neutralizes the residual effects of strippers and cleaners. Neutralizer & Salt Remover for Carpet & Floor can be use with an autoscrubber or manually with a mop. ADVANTAGES 1. It is biodegradable, phosphate and ammonia free and doesn’t contain dangerous caustic agents. 2. Removes effectively salt and calcium deposit. 3. Neutralizes the residual effects of strippers and cleaners. 4. Ideal to cleans car carpets, carpets, ceramic and wood floors. 5. Can be use with an autoscrubber or manually with a mop. DIRECTIONS FLOORS: NOTE: Polished marble and terrazzo floors should be cleaned regularly with a neutral pH cleaner.NEUTRALIZER: Dilute 1 part of Neutralizer & Salt Remover for Carpet & Floor with up to 40 parts of warm water. Apply with an autoscrubber or a mop and allow the solution work for 3 to 5 minutes. Suck up the residue with a mop or a water vacuum. Rinse with clean water and allow surface to dry thoroughly before applying sealer or finish. CLEANER-NEUTRALIZER AND SALT-REMOVER: Dilute 1 part of Neutralizer & Salt Remover for Carpet & Floor with up to 10 parts of warm water. Apply with an autoscrubber or a mop and allow the solution work for 8 to 10 minutes. Suck up the residue with a mop or a water vacuum. Rinse with clean water and allow surface to dry thoroughly before applying sealer or finish. CARPETS: NOTE: Pretest carpets for colourfastness. NEUTRALIZER FOR HIGH PH CARPET CLEANING SOLUTIONS: Dilute 1 part of Neutralizer & Salt Remover for Carpet & Floor with up to 20 parts of warm water. Apply the solution with a sprayer and allow the solution work for 5 minutes. Suck up the residue with a carpet extractor a water vacuum. Rinse with clean water and a carpet extractor or a water vacuum. CALCIUM AND SALT REMOVER: Dilute 1 part of Neutralizer & Salt Remover for Carpet & Floor with up to 4 parts of warm water. Removes excess deposits with rigid spatula or scraper. Apply the solution with a sprayer, saturate deposit. Allow the solution work for 5 to 10 minutes. Absorb with terry towel or a carpet extractor. Rinse with clean water and a carpet extractor. NOTE: For difficult and hard to remove deposit, repeat steps 2 to 5.

Item Code: RXSOL-13-1552-010 Non Rinse Neutral Floor Cleaner/Renovate Industrial Cleaner Non Rinse Neutral Floor Cleaner ::: Non Rinse Neutral Floor Cleaner gives great looking floors. It dissolves dirt light stain buildup which is damaging colour finishes and shining of floor.Its neutral pH value makes compatible to use on most floor. For new look and cleaning this product is very usefull, Poor cleaning of floor surface, can hide the color and shine you worked so hard to achieve. And the most important things no rinse formula saves labor costs. Can be used in industries / home / ship. •Designed for finished and laminate flooring •Neutral pH makes it compatible to use on all most all surface and won't dull finish •Dries film residue free, Usable in mop buckets, automatic machines and foaming equipment. •Pleasant fragrance, Destroys odours at the source. •Leaves floors cleaner and safer, Tougher than caustic products. RECOMMENDED USES: Kitchen FloorsTilesLineConcreteDining areasPatios & Entry waysBathroomsWallsHomeRestaurantsCommercialIndustrial Also can be Excellent for use around pets, it removes soils and odors from urine, vomit, feces, blood and dirt and leaves surfaces shining and streak-free. Non Rinse Neutral Floor Cleaner is formulated with a naturally derived surfactant system that safely and effectively cleans floors and other surfaces without harmful chemicals. Economical to use, this concentrated formula makes dilution as follows ::: Light Cleaning: Dilute 100ml of Non Rinse Neutral Floor Cleaner in 10 Litres of water (ratio 1:100). Mop the floor leaving a thin film of water across the surface and allow to dry. Non Rinse Neutral Floor Cleaner will continue to break down grease and increase slip resistance over a 24 hour period. Heavy Duty Cleaning: Dilute 200ml of Non Rinse Neutral Floor Cleaner in 10 Litres of water (ratio 1:50). Mop the floor as above and allow to dry. DO NOT MIX WITH OTHER CLEANING PRODUCTS OR CHEMICALS Part No. - RXSOL-13-1552-010 Other Valuable Product ::: Renovate Industrial Cleaner - Part No. RXSOL-41-8674-025 A highly concentrated multi-surface, heavy duty industrial cleaner for use on floors, walls, carpets, hard surfaces, porous surfaces and many other professional and disaster restoration applications. Renovate Industrial Cleaner designed to clean carbon, soot, smoke, grease, rubber and deeply ingrained soils. Normal soil: Dilute 10 to 20ml A217 per litre of warm water (1:100 to 1:50). Heavy soil and restoration: Dilute 50ml per litre of warm water (1:20). Ceiling cleaning: Add 50ml "Safe Bleach OxiBrite" ( www.rxmarine.com/colour-safe-bleach ) Part No. - RXSOL-41-8731-025, per 5 litres of Renovate Industrial solution. (Observe cautions below). Pressure washing: Mix 1 part Renovate Industrial Cleaner with 4 parts water and meter at desired setting.Always pre-test surface in an inconspicuous area before proceeding. Do not use on water sensitive fabrics, unsealed wood, aluminium or other delicate surfaces.Apply by sprayer, sponge or floor machine. Allow 2 to 5 minutes contact time for heavy soil, scrub if needed, then rinse surface thoroughly with clean water. Observe all safety precautions. ear suitable personal protective equipment and cover all sensitive furnishings. • Can be used in conjunction with Colour "Safe Bleach OxiBrite" • Cationic solvent-free formula “pulls out” soils by neutralising electrical charge. • Red liquid with floral fragrance.