East India Chemicals - Products
Rust Convertor Neutralizer to increase adhesion for paint
Send an e-mail enquiry to East India Chemicals
Water Treatment Chemical
Link : http://rxmarine.com/CoolingWater/Treatment
3)COW RXSOL RXSOL-40-4014-056
4) Condensnol Amine 20 Ltrs RXSOL-50-5005-020
LIQUID CONDENSATE CORROSION CONTROL FOR BOILER SYSTEMS
5) Condensor Inhibitor 25 Kgs RXSOL-40-4006-025
7)Rust Stain Remover SAFE JELLY-
Bio degradable NON Hazardous Rust Remover , SUITABLE FOR vertical rust removal, Its Rust removal solution is safe and non flamable so even it can be ship by air . Recommended to use a RXSOL ALK 2015 wash after rust removal , to protect FURTHER RUSTING.Part No:RXSOL-18-1012-025
6)Rusto Bright
A chemical Brighting prepration for polishing product, RXSOL RUSTO BRIGHT is a mixture of concentrated inorganic acid for brightening and chemically polishing , Aluminium,copper and copper based alloys. It is an acid form ulation containing surfactant,suppressant and inhibitor for chemical poli shing (bright dipping) of most non ferou alloys. This formulation is widely used commercially contains additives to reduce nitrogen oxide fumes and to enhance the brightening ability.Part NO:. RXSOL-16-1694-025
Item Code: RXSOL-18-1011-020 RXSOL-18-1011 Single component rust neutralizing system giving excellent adhesion to subsequent painting materials . on applying to metal surface it penetrates through and chemically reacts with the rust on the surfaces and forms a fine coherent film of protective coating on the surface which also serves as an excellent base for the primer. When a piece of iron is left exposed to ordinary moist air, it is found covered with reddish brown coating which can easily be detached & is called dust The process of formation of dust is called rustin. Other valuable Product 1)Rust Remover- This is very effective and well balanced products to remove rust from all kinds of surface. This is a well balanced blend of corrosion inhibitors , and surface active highly emulsified acidic materials product for the cleaning of aluminium, copper and removal of rust stains on paint work. * Cleans and brightens aluminium and copper. * Removes rust stains without risk to paintwork. * Safe on most common metals for Rust Removel & Passivation REMOVER RUST, CLEANS COPPER AND ALUMINIUM used to clean aluminous floor plates, copper and bronze sockets, wooden decks and to remove hardness contaminations after tank cleaning, Usually it is used in a 10 to 20% solution. Smaller parts can be immersed in a plastic bath, After 20 minutes working time they can be rinsed throughly and sprayed off with a powerful water jet afterwards. If hardness contaminations remain after tankcleaning a solution of 0.5 liter per every 100 liters of water is to be injected for about 20 minutes in the automatic washing system. The advised temperature is 75 to 80 ‘C.Part No:RXSOL-16-1088-025 2)Rustosol 25 Ltr It is specifically intended for treatment and reduction of corrosive & rust deposits formed on metal components. PACKAGING : 10 / 25 ltrs . ACTIVE MATTER : 86 - 88% COMMON NAME : RUST REMOVER.Part No:RXSOL-16-1021-025 3)Rust Scale Remover 25 Ltrs- Excellent pre treatment and binder for metal surfaces to be painted. concentrated blend of rxsol proprietory formulated various products, which is specifically designed for the rapid removal of rust, while providing phosphatized ferrous metal surface. UN 1805 - III FOSFORZUUR, OPLOSSING Very effective to remove hardness contaminations after tank cleaning, Usually it is used in a 10 to 20% solution. Smaller parts can be immersed in a plastic bath, After 20 minutes working time they can be rinsed throughly and sprayed off with a powerful water jet afterwards. If hardness contaminations remain after tankcleaning a solution of 0.5 liter per every 100 liters of water is to be injected for about 20 minutes in the automatic washing system. The advised temperature is 75 to 80 ‘C.Part No:RXSOL-16-1094-025 3)Rust Stain Remover ( RSR)- Acts as a surface brightener and Specially formulated and developed for removal of rust from any steel surface area and rust stains from brass, copper, stainless steel, aluminum, wood and ceramic surfaces. RXSOL-13-1096-025 is highly concentrate Dilute in water (always use plastic jar and RXSOL-13-1096-025 should be added to water never add water to Surface should be sound clean and free from oil, grease, dirt etc. Diluted materials apply on rusted area for 15 to 20 minutes then wash off with water repeat if necessary (For stubborn rusted stains.) * If the mixture is allowed to overheat, it will soften epoxy / phenolic coating. * Use a strainer at the pumpstack when circulating any solution.Part No:RXSOL-13-1096-025.